GM ACDelco Petrol Gen1 CAN

FID: 91, 94, 96, 97, 98, 99, 100, 102
Module for reading and writing through OBD2 connector by CAN-bus ACDelco Gen1 ECUs used in petrol GM vehicles.
 
GM ACDelco E38 (FID: 96)
ECU is based on MCU Motorola MPC561 with external flash memory 2.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
GM ACDelco E39 (FID: 100)
ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
GM ACDelco E39A (FID: 97)
ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
GM ACDelco E67 (FID: 99)
ECU is based on MCU Motorola MPC565 with external flash memory 2.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
GM ACDelco E78 (FID: 94)
ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
GM ACDelco E80 (FID: 102)
ECU is based on MCU Motorola MPC5676 with internal flash memory 6.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
GM ACDelco E83 (FID: 91)
ECU is based on MCU Motorola MPC5565 with internal flash memory 2.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
GM ACDelco E92 (FID: 98)
ECU is based on MCU NXP SPC5674 with internal flash memory 4.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
Reading/writing time about 3-5 minutes!
 
New ECU type will be added as soon as possible!